Fountain Heads

Oase 1/2 inch Fountain Head SetIncludes nozzle for 4 different spray patterns - choose your favorites! See the chart for spray height and spread details based on pump flow. Connects directly to pump with 1/2" MPT fitting. Minimum Height: 11" Maximum...

Fleur-de-lis type spray fountain head. Includes two 7" extensions For use with Pondmaster PM2, PM3, PM5 & PM7 Pumps Manufacturer's Part #: 02077

Creates adjustable bell (mushroom) spray pattern. Includes two 7" extensions For use with Pondmaster PM2, PM3, PM5 & PM7 Pumps

This water fountain head by Oase is made of ABS plastic. It will provide a spray height of 87 inches and a diameter of 60 inches with 1600 GPH. With 2600 GPH it will provide a height of 166 inches and a diameter of 100 inches.1 inch male threaded fitting...

This stainless steel water fountain head by Oase will provide a spray height of 32 inches with 1600 GPH, and 63" with 2600 GPH.1 inch male threaded connection. Perfect for use with the Nautilus 1600 or Nautilus 2600 Pumps.  

This water fountain head by Oase is made of ABS plastic and will provide a spray diameter of up to 60 inches with 1600 GPH. Diameter can be adjusted.1 inch male threaded connection. Perfect for use with the Nautilus 1600 Pump 3" diameter x 6"...

Single jet creates thick column by inducting water into the nozzle Appearance will vary depending on water level Wind resistant jet designed for larger water features. 304 stainless steel nozzle 1-1/2" MIPT inlet Manufacturer's Part #: FNCC15 /73829

Single central jet and 16 peripheral jets create a thick vertical column of water. Wind resistant jet designed for larger water features. 304 stainless steel nozzle 1-1/2" MIPT inlet Manufacturer's Part #: FNMJ15 /73833

Creates a "frothy" display by inducting air.Wind resistant jet with adjustable orifice to tune exact height designed for small to medium water features. 304 stainless steel nozzle1" MIPT inletSpray...

Single central jet surrounded by 18 arching sprays. Best for circular patterns 6'-12' in diameter for larger fountains Not water level dependent 304 stainless steel nozzle 1-1/2" FIPT inlet Manufacturer's Part #: FNAS15/ 73828 

Directional fan with built-in adjustable ball and socket mount. Best used to create a solid curtain accent when mounted at a 45 degree angle 304 stainless steel nozzle 1" FIPT inlet Manufacturer's Part #: FNDF10/73830

Directional single nozzle with built-in adjustable ball and socket mount. Best used to create a single arching jet when mounted at a 45 degree angle 304 stainless steel nozzle 1" FIPT inlet Manufacturer's Part#: FNDJ10