Quick, easy to use kit for repairing minor damage to your rubber pond liner.
Each EPDM Repair Kit includes:
Step 1 - Ensure the liner is dry and free of mud and other contaminants.
Step 2 - Apply the QuickPrime Plus Primer by pouring a small amount onto the scrubber pad and applying it to the surface of the PondGard panel beyond the perimeter of the area to be repaired with a patch.
Step 3 - Test the primer flash-off by touching the primed area with your finger and pushing forward at an angle. The primer should not string as your finger is moved up and away.
Step 4 - Install the QuickSeam patch by peeling away the release paper and placing the patch over the damaged area of the liner. Note: Edges of the QuickSeam patches may be rounded or cut diagonally to prevent peeling.
Step 5 - Roll the patch evenly over the area to be repaired in order to properly mate the patch and liner together.